Oil & Glycerin Swirls

I’m back in the saddle, the Soap Challenge Club saddle that is! This month’s challenge (put on by Amy Warden at Great Cakes Soapworks) was to add colored oil and/or glycerin swirls to the top of soap, and…Wait for it…Big surprise coming…

I’ve never done this before!

I know. You’re shocked, right?! Ok, not so much? ūüėÄ

I say that nearly every single month!¬†That’s why I love these challenges so much. I’m introduced to or reminded of techniques that I’d like to try, and I learn something (or LOTS of things) every time.

This time around, I needed to restock on Satsuma soap, so that was the scent du jour. It’s an awesome sweet tangerine scent that doesn’t accelerate trace, perfect for any type of design I want to create (which is why I make something different with it every time I use it)! This was also the perfect opportunity to practice some previous skills learned in the club and use my awesome slab mold.

I created a column swirl soap by alternating pours of uncolored soap, neon tangerine soap, and neon mango mixed with a bit of neon pink. Those colors just seem to be the perfect fit for this lovely citrus scent. Since my mold is so big, I used 2 columns, effectively dividing the soap and giving me 2 different areas to play with when it came time to make my swirls on top!

Satsuma Soap column pours

Satsuma Soap being poured over 2 columns

On one half of the poured soap, I created what looked like the spokes of a wagon wheel by alternating stripes of gold mica dispersed in oil and pink mica in oil. Then using a bamboo skewer, I started in the middle and spun around the circle in an outward motion, expanding until I reached the outer edges. Then, I wound my way back toward the center between the lines created in the first round.

IMG_2457 (2)

Mica in oil drizzles and dots!

On the other half of the soap, I placed drops of gold and pink randomly about, then I drug my bamboo skewer through the middle of the drops randomly as well.

IMG_2463 (2)

Complete with swirls!

I went ahead and oven processed this soap, and I cut it just 24 hours after making it. It was a bit soft, but the oil swirls on top had already completely absorbed into the soap. My only mistake was leaving the soap on the counter to find my camera and get my cutting utensils out. One of the triplets got up on a stool and couldn’t resist touching the beautiful sparkles on top! She smudged it around in a few places before I caught her, and she was oh-so-happy with the beautiful pink and gold glitter sparkles on her finger! NEVER a dull moment around here.

IMG_2527 (2)

Satsuma Soap

Overall, I’m pretty pleased¬†with how this soap turned¬†out. I would have been perfectly happy to leave the beautiful column swirled soap alone, but adding the mica/oil swirls on top gives it extra interest (which obviously greatly appealed to my three-year-old). The column pour made some really cool stripes throughout each bar of soap, and the scent is amazing! AND, it’s my mom’s favorite fragrance, made just before¬†Mother’s Day (though she’ll have to wait a bit for curing). ūüėČ

IMG_2532 (2)

Lots of interesting things to look at here from the stripes running throughout each bar to the glittery mica swirls on top!

IMG_2524 (2)

These Taiwan-esque swirls are curvy and fun thanks to the circular pattern.

Because this was so fun, I just had to make a second soap as well! I wanted to make glycerin swirls, too, and I wanted to try my hand at another Taiwan Swirl soap (also a previous challenge technique). My slab mold was already out, and I was feeling inspired.

This Green Clover & Aloe soap¬†was¬†made using uncolored soap as the base with pours of light green and dark green (made by mixing yellow and blue oxides). After pouring the greens from on high, I used a dropper to add gold mica stripes and white stripes of titanium dioxide in glycerin. The glycerin stripes started to separate and bead up almost immediately, which turned into some really pretty swirls. Here’s what the process looked like.

IMG_2506 (2)

I was a bit messy with my pours. Oops!

IMG_2507 (2)

The glycerin started beading up immediately!

IMG_2508 (2)

Vertical swirls being added now.

IMG_2512 (3)

The final raw soap just before putting it to bed. Ooooh! So sparkly!

And the result?

IMG_2889

Green Clover & Aloe Soap with oil and glycerin swirls

So fantastic! I love the way this turned out! AND, it’s my dad’s favorite scent! So, one for mom and one for dad in the same week. ūüôā Though I’m not too sure how my dad is going to respond to the sparkly tops. Hmmm.

I left this soap in the mold for 2 days as it took longer for the glycerin to absorb into the soap. The oil and glycerin swirls left behind some really cool texture on the soap tops, and the swirls are really feathery and beautiful.

IMG_2872 (2)

Here you can really see the textured tops. Deep crevices were left behind when the glycerin absorbed into the soap.

Now I’m left wondering which soap to enter into the challenge! I think I’ll go for the first soap since it’s so bright and cheery. Which would you choose?

As always, I’m looking forward to seeing everyone’s awesome creations!¬†Thanks so much, Amy, for putting together such great info and connecting all of us together under the banner of learning more about this artistic and fun craft!

Advertisements

Column Pour Technique

Here we go again! Another Soap Challenge put on by Amy Warden of Great Cakes Soapworks! December’s technique is called the column pour, and it’s new to me (as usual). I’ve seen this done many times, but I’d never tried it until now.

Part of the reason I haven’t tried it is because it works better in a slab mold, something which I do not currently own! I made a small makeshift slab out of a log mold for my Illini soap, but I wanted to make a larger batch this time around. (Please, oh please, dearest hubby, get me or make me a real slab mold for Christmas!!!)¬†Check out what I used this time!

DSC03982

My makeshift slab mold

I emptied out a drawer from the bottom of the bathroom vanity, child safety lock included! It was a bit too long, so I taped some thick cardboard inside the drawer, lined my mold, and set off to find a column. I had a terrible time finding a square to use as a column, so I resorted to taping together two 9V batteries! 

According to Amy, I didn’t need any special slow-tracing soap recipe, so I used my typical skin-soothing recipe with 8 oils and butters. I made the lye solution and left it in the cold garage to cool, then melted the oils and butters and left them out on the kitchen counter for a couple of hours (just enough time to feed the kiddoes, clean up the mess, and get them down for a nap so I could play with soap!).

My vision for this soap was to create an awesome St. Patrick’s day design, complete with lots of green colors and some cool 4-leaf clovers in the swirls! I’m about out of Green Clover & Aloe soap, so this was the perfect time to restock, but with a new design. The only problem is that the last time I made it, the soap traced really fast and was almost unworkable. The result (shown here at the bottom of the post)¬†was still pretty cool, and the scent is especially popular with guys. I really wasn’t sure then if the fast trace was due to my soap recipe, from overblending (I am pretty zealous with that stick blender sometimes), or because of the fragrance.

Verdict: Green Clover & Aloe is the culprit! Here’s how I know…

I planned out my vision using three shades of green (for the clover), a cup of beautiful gold mica (the pot o’ gold), and some white for extra contrast. I was very careful to blend the cooled lye and oils only to emulsification. Then I separated it all into the colors, pulsed the blender only a couple of times to mix in the oxides, and began pouring right away.

DSC03988 (2)

First few pours on the column, and it’s looking like a clover!

The first few pour patterns were coming along just beautifully!

And then it happened. The soap suddenly became thick and nearly unpourable. I continued to try to pour it out on top of my “column,” but it really ended up just being a plop of thick soap followed by a wiggle and shake of the mold, trying to get the soap to spread out. The end result was still layers, though not fluid like they were supposed to be. The middle of my slab was thick with soap, while the edges were thin. I had to work really hard to try to spread it out from the center, but that’s hard to do without totally messing up the design pattern. Since I was so careful to work with this soap and I know my recipe doesn’t trace quickly, the fragrance must be the villain!

I also wanted to try to create some sort of swirls in the soap, but that didn’t work out too well either! I inserted a bamboo skewer to the bottom of the mold and drug it around trying to make something pretty out of something not-so-pretty. In a few of the corners, I tried to make some 4-leaf clovers, but I’m afraid I just left some air bubbles in a muddy mess of soap.

DSC03990

It’s magic! The bamboo skewer is standing up all by itself in that soap! See how the layers didn’t spread out in a fluid pattern? The gold mica colored soap was the only bit that stayed rather fluid, so it ended up spreading out over many of the other layers.

By the time I was done, the soap was mounded up in random places, and there was no slamming it down flat! It was entirely too set up, so I sprayed it with alcohol and stuck it in the oven for while.

Here’s a good shot of the textured top just out of the mold. Can you see that measly attempt at a clover in the bottom corner?

DSC03995

Fresh out of the mold, the textured top looks pretty cool, but it doesn’t show off the layers like the inside will!

DSC04002

A cut bar of Green Clover & Aloe with the textured top.

DSC04004

The same bar of Green Clover & Aloe soap with the textured top shaved off. This one has some beautiful swirls, but see those air pockets?! Ugh. Thankfully, not every bar has so many pockets.

Once I got it all cut and cleaned up a bit, it’s really not too shabby! The greens have enough contrast to show up well, and there aren’t as many air pockets as I feared. Once again, the result isn’t perfect or nearly as pretty as I’d envisioned, but it’s still soap that washes well and smells great!

DSC04015 (2)

The layers along every side of each bar are really cool!

DSC04010 (2)

Each bar is unique in design, shape, and size! I even left that cool textured top on a few bars for added interest. Using them will be like unwrapping a present, slowly revealing the design with each lather!

As usual, I learned a lot doing this technique. Next time, I’ll definitely use a fragrance that I know for certain does not affect trace. I’ll also use a bigger and taller column! Those batteries ended up being way too small, especially when covered with mounds of rapidly hardening soap! More interest could be added to the soap if I used more than one column as well. Amy used 2 columns in her slab to create her gorgeous soap, and I think even more columns strategically placed throughout would create some pretty awesome designs.¬†Off to plan my next batch now! Happy soaping, and thanks for stopping by!