Soap Embed Challenge

It’s that time again: Soap Challenge Club time! This month’s creation was to include embeds in cold process soap. After nearly two years of soap making, I’m slightly embarrassed to admit that I’ve NEVER added embeds into any soap! I’ve been collecting different silicone molds for quite some time, planning out lovely soaps with embeds all the while in my head. There are just so many different techniques to try and only so many hours in a day!!! Thank goodness for Amy and her challenges, or I might never try some of those things that I’ve intended to do. Deadlines and group accountability are two things that motivate me well!!!

So here’s the result.


Pixie Dust Soap

Pixie Dust soap (version 2.0) was born simply because I needed to restock that scent! (Here’s what version 1.0 looked like, also from a club challenge!) I have several young girls who love it, and I wanted to make a new design that was specifically for them. I bought some star ice cube silicone molds just after the 4th of July on clearance, and I thought they’d be perfect on top of a magical fairy wand.

I began by making embeds using the microwave hot process method that Amy showed in her awesome-as-usual tutorial. I used a one-pound recipe and a tall plastic container, carefully stirring the soap after 2 minutes of half-power heating, and then after another 2 minutes of heating. I’m glad that I didn’t walk away, because the soap started to volcano after just one more minute of heating! I stirred it down just before it bubbled out all over my microwave, then heated it for about 45 more seconds when it bubbled up again. At that point, it looked like soupy applesauce, so I continued to stir it until it cooled and began to come back together.


Microwave hot process soap

After about 7 minutes of stirring and at about 160 degrees, I split off half of the soap, stirred in neon yellow colorant with gold mica, and added some fragrance. It was messy, but I pushed the yellow soap down into the star molds, filling them as best as I could. Then, I colored the remaining soap white and mushed it into the bottom of a long wooden mold, the same one that I would later use to make the final soap.


Once this piece hardened, I trimmed it up a bit and used it turned vertically to create the handle of the fairy wand.

After only a few hours, the hot process soap was cooled and hardened enough to remove it from the molds. The silicone star molds worked amazingly well!


The stars popped right out!

I made a few soap curls from the white trimmings, and I also chose some pink, orange, and yellow scraps out of various recent soap trimmings to use in the final soap.


Soap curls to embed for some added whimsy.

Later in the same day, I made the remainder of the soap using my regular nourishing recipe and adding in yogurt. I turned the soap a lovely shade of deep lavender. I thought the bright pinks, oranges, and yellows would really stand out, creating some fun “pixie dust” colors! After adding a bit of purple soap to the bottom of my mold, I put in the white wand, then began adding soap scraps and curls followed by more purple soap and repeating.


When the new soap reached the top of the wand, I stacked the stars down the length of the mold along the top of the white column.


Stacking the stars was pretty difficult!


My only issue was that I didn’t quite  make enough new soap! I ran out of purple and had to pile it up around the stars to get them to stay put. Plus, the purple soap was extremely set up at that point. Simply put, I made a magical mess! I spent a long time tamping the mold and pushing soap down, trying to eliminate as many air bubbles as possible. I finally gave up and sprinkled on some glitter. Can’t have a pixie dust soap without glitter! 


Not so pretty from here!!

Boy, that top looked messy. Unmolding the soap the next morning was a bit scary. I did find many air pockets, but mostly small ones.


The big reveal…Rather underwhelming.


The first few cuts weren’t too shabby! A few air pockets, but nothing major.

This is certainly not the prettiest soap I’ve ever made, but it’s not the worst either! The soap scraps and swirls make this whimsical and fun, and the color combination is quite girly. My triplets were ooh-ing and aah-ing over the stars and glitter as I was cutting it. It was hard to explain to them why they couldn’t use the soap yet! That curing time is such a kicker!!! I completely understand their disappointment. Don’t all of us soap makers feel that way?! Waiting for soap to cure is probably the hardest part of the job!


Pixie Dust Soap

Overall, this soap came out reasonably well. I figured out that next time, I’ll mix the soap scraps directly into the new soap before adding it to the mold. I’ll also make more soap than I think I’ll need just to be sure I have enough!


Pixie Dust Soap. (I’ll clean up those rough edges once the soap has had more time to harden.)

Now that I’ve finally made a soap with embeds, I’ve got to get on with it! I have so many cute molds to try out, and so many ideas. And did I mention the piles and piles of ends, scraps, shavings, and uglies that I’ve been storing? So many possibilities. So little time. Thanks, Amy, for another great challenge!

23 thoughts on “Soap Embed Challenge

    • Thanks so much, Amy! What a compliment coming from the challenge master herself!! 😀 I did intend all along for the stars to pop out of the top, but I was hoping the rest of the soap would be more level. Oh well. It works! 🙂

  1. How whimsical and fun! I can understand how your girls were disappointed in having to wait. I was not brave enough to try the hot process technique yet. I kept envisioning soap exploding all over my microwave ( I have exploded many bowls of hot cereal that way). :p Maybe after seeing success with yours and Amy’s HP, I’ll give this a try.

    • Thanks! 🙂 You should definitely give the microwave HP a try! I was so surprised by how quickly the reaction occurred. Only about 20 minutes start to finish! It was really fun to do! Just be sure to stay close and watch carefully. I guess even if it did explode, at least it would be contained inside! 🙂 Fingers crossed for no soaplosions though!!!

    • Thank you! A star column mold would be much easier! Haha. My husband was taking pictures of the process, and I kept telling him to back up and look out for flying soap!

  2. I can definitely see how your girls would want to get their hands on this soap ASAP. What little girl doesn’t like dancing around with fairy wands? Very clever and just adorable.

    • Exactly! My three- and five-year olds dress up in costumes constantly and dance around telling me they’re fairy princesses. Don’t have to look too far for girly inspiration around my house!

  3. Pingback: Confetti Soaps | Five Messy Babies

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s